LEFOO spiediena sensors T2000 0-6bar
The heart of T2000 pressure transmitter is a ceramic pressure sensor (If you need higher accuracy and pressure, we have a transmitter with an oil-washed silicon core) that is temperature compensated and laser trimmed for accurate span and offset calibration. The typical advantage is the compact size, which make it convenient to be installed in small room. Some typical applications for these pressure sensor are: Process control and automation, compressors and pumps, engine controls, off road vehicles to name few.
Specification
|
Measuring Range |
0~4…60bar (nomal range) |
|
-1~4…100bar , 0~2…3bar , 0~61bar…600bar |
|
|
Output / Power Supply |
4~20mA / 12~30VDC (2 wire) |
|
0.5~4.5V / 5VDC (3 wire ) |
|
|
0/1~5V / 10~30VDC/AC (3 wire ) |
|
|
0~10V / 12~30VDC/AC (3 wire ) |
|
|
Accuracy: ±0.5%F.S ±1.0%F.S |
|
|
Stable: ±0.5%F.S, ±1.0%F.S (Max) |
|
|
Overload Capability: 1.5 times full scale |
|
|
Burst Pressure: 3 times full scale |
|
|
Response time : 10ms |
|
|
Medium Temperature Range : -40°C +100°C |
|
|
Compensated Temperature:-10°C+80°C |
|
|
Storage Temperature Range:-50°C+125°C |
|
|
Sample line connection: male G1/4, NPT1/4, M20×1.5, G1/2, 7/16-20UNF(other connection is available on request) |
|
|
Electrical Connection: Packard, DIN43650C, M12 Series, Cable |
|
|
Protection Class: IP67 |
|
|
Pressure Type: Guage pressure |
|
|
Insulation Resistance: >100MΩ@50V |
|
|
Electro Magnetic Compatibility: EN50081-1/-2; EN50082-2 |
|
|
Material |
Enclosure: 1Cr18Ni9Ti Stainless Steel |
|
Connection: 1Cr18Ni9Ti Stainless Steel |
|
|
Wet material: Ceramic |
|